Full range of threaded rods: From grade 4.8 to grade 12.9
Our range of threaded rods meets all your mechanical assembly needs, from standard applications to the most demanding projects. We offer an extensive selection of products, ranging from mild steel threaded rods in grade 4.8 to high-strength grades 8.8, 10.9 and 12.9, as well as specialised solutions in A2 and A4 stainless steel, hot-dip galvanised or brass.
Compliant with the current NFE 25-136 and ISO standards, our threaded rods are available in a wide range of diameters (M03 to M60 depending on the product code) and come in standard lengths of 1, 2 or 3 metres, with the option of bespoke manufacturing.
Our detailed range of threaded rods
To meet your environmental requirements, we offer several surface finish options: plain, Cr3 blue-white zinc-plated, HTC zinc-plated for high corrosion resistance, or hot-dip galvanised for maximum protection. Specific treatments are also available on request.
Our range is complemented by additional technical solutions: threaded ends and tie rods, threaded rods with special pitches (left-hand, round, trapezoidal or fine), as well as a comprehensive range of accessories (DIN 934-ISO 4032 nuts, DIN 125-NF E 25-513 washers, cylindrical or hexagonal sleeves and toggle bolts).
Class 4.8 mild steel threaded rod
A cost-effective and versatile solution for standard assemblies, available in sizes from M03 to M60, compliant with NFE 25-136, with customisable finishes and lengths ranging from 1 to 3 metres.
Class 8.8 steel threaded rod
Enhanced mechanical performance for demanding applications, heat treatment certified to ISO 898-1, marked with yellow paint, diameters M04 to M60.
Class 10.9 steel threaded rod
High strength, certified to ISO 898-1, with heat treatment, white paint and Class 10.9 marked with white painting; available in a raw or zinc plated finish on request.
Class 12.9 steel threaded rod
Maximum mechanical strength for critical applications, certified to ISO 898-1, with black paint marking and Class 12.9 marking at the ends.
Stainless steel threaded rod
Optimal corrosion resistance in stainless steel, compliant with ISO 3506-1, grade A2 for standard use or A4 (marine/aggressive environments).
Brass threaded rod
CuZn36 (CW507L) alloy offering excellent machinability and electrical conductivity, available in sizes from M03 to M24, compliant with NF E 25-136.
Round threaded rod
Technical solutions for Round thread, available in grade 4.8 steel, stainless steel and brass, depending on the application.
Threaded rod – Left-hand thread
Technical solutions for left-hand threads, available in 4.8–8.8 grade steel, stainless steel and brass, depending on the application.
Threaded rod – Trapezoidal thread
Technical solutions for trapezoidal thread are available in grade 4.8 steel, stainless steel and brass, depending on the application.
Threaded rod – Fine pitch
Technical solutions for fine pitches, available in grade 4.8 steel, stainless steel and brass, depending on the application.
Hot-dip galvanised threaded rod
Maximum corrosion protection with a zinc coating thickness of 60–70 microns, for outdoor applications and harsh environments; oversized nuts are required.
Threaded ends rods – Threaded stud bolts
Flexible rolled threads along the entire length or at the ends, available in steel grades 4.8–8.8, stainless steel and brass, with a variety of finishes.
By-products – fastening accessories
A complete range of nuts (DIN 934, DIN 980, DIN 985 and ISO 4032).
Washers (NF E 25-513), cylindrical and hexagonal sleeves, and toggle bolts.